Updated 2026-11-16
Electrician jobs in Kenya are easier to find when you search by the work you can do, such as installation, maintenance, electrical artisan or auto-electrician work. Check each vacancy against the original employer advert, match its qualifications to your certificates, and confirm the relevant EPRA licence scope for installation duties. This guide explains the search and licensing process, rather than presenting unverified vacancies as open today.
Start with Cazini's job listings, then confirm any suitable vacancy through the employer's original recruitment notice. Search beyond “electrician”: an advert headed “electrical artisan” or “maintenance technician” may be worth reading, while a similarly titled role may involve equipment you have never worked on.
For national public-service opportunities, use the Public Service Commission's official Jobs page, listed under Sources. PSC publishes advertised government jobs there and provides an official online application route. Follow the instructions for the particular vacancy rather than sending a speculative application to an unrelated office.
For county opportunities, browse county government jobs, then verify the notice with the named county. Do not assume a county vacancy uses the same application channel as a PSC vacancy.
Before preparing attachments, record:
A repost is a lead, not proof that recruitment is still open. If the original notice cannot be found, verify it through an independently confirmed employer contact before sharing sensitive documents.
Use the following distinctions to screen adverts, not as universal qualification rules. The employer's actual duties and requirements decide whether you are a match.
| Search Terms | What to Check in the Advert |
|---|---|
| Electrician, installation electrician, site electrician | Installation duties, your relevant practical training and the applicable EPRA licence scope. |
| Maintenance electrician, industrial electrician | Equipment involved, fault-finding expectations and whether your experience matches the maintenance work. |
| Electrical artisan, electrical technician | The exact trade certificate, craft certificate or diploma requested, rather than relying on the title. |
| Auto electrician | Whether the duties concern vehicle electrical systems and whether your training covers them. |
| Trainee electrician, apprentice, electrical assistant | Entry requirements, supervision and whether the role is genuinely intended for a learner. |
| Solar technician, solar installer | Solar-specific duties, training and licensing requirements to confirm with EPRA. |
Do not treat “electrical engineer” as interchangeable with “electrician”. Read the advertised qualification before applying, even if the title contains the same electrical keyword.
If you are new to the trade, make supervised practical work visible. Describe what you worked on, the tasks you performed and who supervised you. Keep paid employment, attachment and training clearly labelled.
EPRA's Electricity and Renewable Energy Licensing Application User Manual gives the following qualification pathways. These are the guide's starting and highest achievable classes, not a promise of immediate approval at the highest class.
| Qualification in EPRA's Guide | Starting Class | Highest Achievable Class |
|---|---|---|
| KCPE plus Electrician Wireman Grade II or equivalent | C2 | C2 |
| KCSE plus Electrician Wireman Grade II or equivalent | C2 | C1 |
| KCSE plus Electrician Wireman Grade I or equivalent | C2 | B |
| KCSE plus Electrical Technician Parts II, III or Final, Craft Certificate, Diploma in Electrical Engineering or equivalent | C2 | A1 |
A diploma does not mean you should automatically describe yourself as an A1 licence holder. State the qualification you hold and the licence actually issued to you separately. If you are seeking progression, prepare your qualification records and ask EPRA what applies to your case.
A Worker Licence Is Not a Contractor Listing
The Energy Act defines an electrical worker by the electrical installation work specified in the certificate issued under its electrical-worker provisions. Licence scope therefore matters when judging whether you can take responsibility for an advertised task.
EPRA publishes separate lists of registered electrical workers and licensed electrical contractors. Do not treat an employer's contractor listing as evidence that you personally hold an electrical-worker licence, or treat your worker listing as proof of contractor licensing.
Use EPRA's Electricity Registers page, listed under Sources, to check licensing claims. Its downloadable worker and contractor lists support that check, but a licensing entry alone does not prove that someone contacting you represents a genuine vacancy.
The figures below are from EPRA's 2025 English Service Delivery Charter. Application, grant and annual renewal are separate fee categories, so an application fee should not be presented as the entire licensing cost.
| Class | Application Fee | Grant Fee | Annual Renewal Fee |
|---|---|---|---|
| A1 | KSh 1,000 | KSh 5,000 | KSh 2,000 |
| A2 | KSh 1,000 | KSh 5,000 | KSh 2,000 |
| B | KSh 750 | KSh 3,000 | KSh 1,000 |
| C1 | KSh 500 | KSh 2,000 | KSh 750 |
| C2 | KSh 250 | KSh 1,000 | KSh 500 |
Check EPRA's current instructions before paying. These are regulatory licensing fees, not permission for a recruiter to charge you for employment.
Recruitment fees are fraud. Never pay anyone for an electrician job, shortlisting, an interview or a “slot”. A genuine EPRA licensing payment is separate from recruitment and should follow EPRA's official instructions.
EPRA's licensing guide says a new applicant must have scanned academic documents, a National ID and the applicable licensing fee before applying. Assemble clear copies and check that your qualification names match your certificates.
Go to EPRA's License Application page, listed under Sources, and follow its route to the online licence-application service. Use the class supported by your qualifications and EPRA's instructions, rather than selecting a higher class simply because a vacancy requests it.
Ask EPRA to clarify any uncertainty about equivalence, progression or scope. Do not describe a pending application as an issued licence on your CV.
Put your trade qualification and actual licence status near the top of your CV. Follow with relevant installation, maintenance or fault-finding experience, using the employer's terminology only where it accurately describes your work.
For each relevant assignment, explain:
Prepare certificates, licence evidence and other documents the advert requests, but distinguish “ready to provide” from “attach now”. EPRA's requirement for a National ID during licensing is not a reason to send your ID to an unverified recruiter.
For public-sector applications, follow the vacancy's stated requirements exactly. An accurate CV does not replace a required application form or missing information.
Ask for the duty station, electrical responsibilities, reporting arrangement and pay terms in writing. Clarify whether the quoted pay includes allowances and how travel between work sites will be handled. If you receive a gross salary offer, use the Kenya PAYE calculator to help assess it rather than treating gross pay as take-home pay.
Pause if a recruiter requests money through a personal payment number, promises guaranteed selection or refuses to provide the original advert. Verify the employer independently, not through another contact supplied by the same sender. Cazini's ethical hiring guidance is also relevant when assessing recruitment conduct.
Use vacancy listings to identify opportunities, then confirm each opening against the original employer advert. For government openings, check the Public Service Commission's official Jobs page and the relevant county's official recruitment notice. Match the job reference, location, deadline and application channel before sending documents.
For electrical installation work, treat licensing and its scope as essential checks, not just optional CV credentials. The Energy Act defines an electrical worker by the installation work specified in their certificate. Check that your licence covers the proposed work, and ask EPRA if the scope is unclear.
EPRA's licensing guide lists C2 as the starting class for Electrician Wireman Grade II or equivalent. It shows C2 as the highest achievable class with KCPE, and C1 with KCSE. A highest achievable class is a progression ceiling in the guide, not an automatic licence award.
Focus your search on trainee, apprentice, assistant and attachment opportunities rather than vacancies requiring independent maintenance experience. Show relevant workshop training, supervised practical work and the equipment you have actually used. Do not describe classroom exercises as paid employment or claim competence you cannot demonstrate.
You can search for solar roles, but do not assume an electrical-worker licence settles every licensing requirement for the advertised work. Ask EPRA to confirm the applicable licence and scope before accepting installation responsibilities. On your CV, separate actual solar training and experience from general electrical work.